C 1500 Truck 2WD V8-6.0L VIN U (2002)
3. Remove the nut and the bolt from the quarter shaft shield.
4. Remove the shield.
5. Remove the 2 brake caliper mounting bolts.
Notice: Refer to Support the Brake Caliper While flex Hose is Connected Notice in Service Precautions.
6. Remove the brake caliper and support with heavy mechanic's wire or equivalent. DO NOT disconnect the hydraulic brake hose from the brake
caliper.
7. Remove the 2 brake caliper mounting bracket bolts.
8. Remove the disc brake pads from the brake caliper mounting bracket.
9. Remove the anti-rattle clips from the brake caliper mounting bracket.