C 1500 Truck 2WD V8-6.0L VIN U (2002)
Cruise Control Servo Cable: Service and Repair
CRUISE CONTROL CABLE REPLACEMENT
REMOVAL PROCEDURE
IMPORTANT: The cruise control cable does not require mechanical adjusting after replacement. The cruise control module internally adjusts the
cable. Refer to Cruise Control Description and Operation (w/o ETC) or Cruise Control Description and Operation (W/ ETC) or Cruise Control
Description and Operation (Diesel) for the complete operational details.
1. Remove the engine sight shield.
2. Disconnect the cruise control cable locator clip from the outboard rectangular hole in the routing bracket at the left front corner of the engine.
3. Disconnect the cruise control cable conduit fitting from the round hole in the engine cable bracket.
NOTE: Do not remove the C-clip from the cruise control connector. The C-clip was not designed for removal. Damage may occur when removing.
4. Disconnect the cruise control cable engine-end fitting from the stud on the throttle lever.
5. Disconnect the cruise control cable fitting from the cruise control module.
