C 1500 Truck 2WD V8-6.0L VIN U (2002)
Harmonic Balancer - Crankshaft Pulley: Specifications
Crankshaft Balancer Bolt (Installation Pass-to Ensure the Balancer is Completely Installed) ............................................................. 330 Nm (240 ft. lbs.)
Crankshaft Balancer Bolt (First Pass-Install a NEW Bolt After the Installation Pass and Tighten as Described in the First and Final Passes) ................ 50
Nm (37 ft. lbs.)
Crankshaft Balancer Bolt (Final Pass) ................................................................................................................................................................ 140 degrees
