C 1500 Truck 2WD V8-6.0L VIN U (2002)
6. Install the EVAP purge solenoid vent tube to the solenoid (1) and vapor pipe.
7. Install the accelerator control cable bracket (2) to the intake manifold.
8. Install the accelerator control cable bracket bolts (1).
-
Tighten the accelerator control cable bracket bolts to 10 Nm (89 inch lbs.).
Important: Lightly coat the MAP sensor seal with clean engine oil before installing.
9. Install the MAP sensor (1) to the intake manifold.
