C 1500 Truck 2WD V8-6.0L VIN U (2002)
8. Install the left exhaust manifold pipe nuts.
9. Tighten the right exhaust manifold pipe nuts.
-
Tighten the nuts to 50 Nm (39 ft. lbs.).
10. Install the insulator to the bracket.
11. Install the nuts attaching the insulator to the bracket.
-
Tighten the nuts to 40 Nm (30 ft. lbs.).
12. Install the exhaust pipe hanger bracket bolts.
-
Tighten the bolts to 17 Nm (13 ft. lbs.).
13. Connect the oxygen sensor electrical connector.
14. Connect the CPA retainer.
15. Install the clip around the engine harness and oxygen sensor pigtail.
16. Connect the oxygen sensor electrical connectors (1, 2).
17. Connect the CPA retainers.
