Brake Power Shown on DIC: 02-05-23-004 Technical Service Bulletin
4.
Inspect the left front corner of the intake manifold for a "C" with a circle around it (2).
^
If the intake manifold DOES have a "C" (2) on it, continue with Step 5.
^
If the intake manifold DOES NOT have a "C" (2) on it, continue with Step 19.
5.
Disconnect the accelerator control cable clip from the engine sight shield retainer.
6.
Disconnect the cruise control cable clip from the retainer if equipped.
7.
Remove the engine sight shield retainer bolts and the retainer if equipped.
8.
Inspect rear center of the intake manifold just below the recycle symbol for "MADE IN CANADA" (2).
^
If the intake manifold DOES have "MADE IN CANADA" (1) on it, continue with Step 9
^
If the intake manifold DOES NOT have "MADE IN CANADA" (1) on it, continue with Step 16.
