Throttle Position Sensor Diagrams for C 1500 Truck 2WD V8-60L VIN U (2002) - Page 5880
Throttle Position Sensor: Service and Repair
REMOVAL PROCEDURE
NOTE: The TP sensor is an electrical component. Do not soak the TP sensor in any liquid cleaner or solvent as damage may result.
IMPORTANT: If the vehicle is equipped with electronic throttle control (ETC) the throttle position (TP) sensor is NOT serviceable. The throttle
body and TP sensor MUST be serviced as a complete assembly.
1. Remove the generator.
2. Disconnect the TP sensor electrical connector.
3. Remove the TP sensor screws (5).
4. Remove the TP sensor (6).
5. Remove the TP sensor O-ring seal (7).
INSTALLATION PROCEDURE
