C 1500 Truck 2WD V8-6.0L VIN U (2002)
3. Remove the caps from the fuel tank hose/pipes.
4. Connect the fuel feed and return hose/pipes at the fuel tank.
5. Install the EVAP canister.
6. Install the fuel hose/pipe clips to the transmission brackets.
7. Install the fuel hose/pipe clip to the transfer case bracket, if equipped with 4WD.
8. Install the fuel hose/pipe bracket to the bellhousing stud.
9. Install the fuel hose/pipe bracket nut (5) to the bellhousing stud.
10. Lower the vehicle.
11. Remove the caps from the fuel rail pipes.
12. Connect the EVAP tube rear connection.
