gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Fuel Pump Pressure|Page 6387 > < Fuel Pump Pressure|Page 6385
Page 5
background image

Fuel System Diagnosis - Steps 19-25

The numbers below refer to the step numbers on the diagnostic table.
2. This step verifies that the fuel pump is operating.
4. This step tests for an internal fuel leak. If the fuel pressure drops during this test, then an internal loss of pressure is indicated.
6. This step tests the fuel pressure regulator. The fuel pressure regulator is controlled by the engine vacuum. With the engine vacuum applied, the

pressure should drop to the specified value.

9. This step inspects the fuel pressure regulator for a fuel leak from the vacuum port. If fuel leaks from the fuel pressure regulator while the fuel

pump is commanded ON, replace the fuel pressure regulator.

10. This step tests for a loss of fuel pressure between the fuel feed pipe shut-off adapter and the fuel pump.
11. This step tests for a leaking fuel injector or for a leaking fuel pressure regulator. If the fuel pressure remains constant during this test, the fuel

injectors are not leaking fuel.

Fuel Pump Pressure|Page 6387 > < Fuel Pump Pressure|Page 6385