C 1500 Truck 2WD V8-6.0L VIN U (2002)
6. Lubricate a NEW O-ring (20) with clean engine oil.
7. Install a NEW crossover pipe O-ring (20) on the crossover pipe (25).
8. Install the crossover pipe (25) into the right fuel rail (15).
IMPORTANT: When installing the retaining clip attaching screw for the crossover pipe, always start the screw by hand. This will prevent
consequent stripping of the threads in the fuel rail.
9. Loosely install the crossover pipe retainer (21) and retaining clip attaching screw (22) to the right fuel rail.
10. Install the fuel rail.
11. Apply a 5 mm (0.020 in) band of GM P/N 12345382 (Canadian P/N 10953489) threadlock, or equivalent, to the threads of the fuel rail bolts.
NOTE: Refer to the Fastener Notice in Service Precautions.
12. Install the fuel rail bolts.
Tighten
12.1. Tighten the bolts to 10 N.m (89 lb in).
12.2. Tighten the screw to 3.8 N.m (34 lb in).
13. Connect the fuel feed and return pipes (1, 2) to the fuel rail. Refer to Quick Connect Fitting(s) Service (Metal Collar).
