Underhood Electrical Center Replacement for C1500 Truck (2002)
10. Remove the engine electrical center bracket assembly from the fender.
INSTALLATION PROCEDURE
1. Install the engine electrical center bracket assembly to the front fender.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the 4 retaining bolts (1).
Tighten
Tighten the 4 retaining bolts (1) to 9 N.m (80 lb in).
3. Align the electrical center block (1) stubs in the slots so that the tabs (2) retains it in place.