C 1500 Truck 2WD V8-6.0L VIN U (2002)
5. Remove the pitman shaft retaining ring (2) from the steering gear housing (1) using J 4245.
6. Remove the backup washer (3) from the steering gear housing (1).
7. Pry the pitman shaft seal (2) from the steering gear housing (1) using a screwdriver.
8. Inspect the housing for burrs and replace if necessary.
9. Insert J 6278 through the hole in the top of the steering gear housing (1).
10. Drive out the needle bearing (2) from the steering gear housing (1).
Assembly Procedure
