C 1500 Truck 2WD V8-6.0L VIN U (2002)
2. Install the upper ball joint retaining bolts (2) and stud (1).
^
Tighten the bolts to 110 Nm (81 ft. lbs.).
3. Install the nut (1) retaining the upper ball joint to the steering knuckle. Use the J 44664 (2) in order to tighten the joint.
^
Tighten the upper ball joint to , the steering knuckle nut to 200 Nm (147 ft. lbs.).
4. Install the bracket (7) to the axle.
5. Install the bolt (8) and nut (2) retaining the bracket to the axle.
^
Tighten the bolt and nut to 25 Nm (18 ft. lbs.).
6. Install the bolt (4) retaining the brake hose bracket (3) to the axle.
^
Tighten the brake hose bracket retaining bolt to 12 Nm (106 inch lbs.).
7. Install the tire and wheel.
8. Lower the vehicle.
9. Perform a four wheel alignment.
