Service and Repair for 4L60-E Automatic Transmission Valve Body on C 1500 V8-60L Truck (2002)
9. Move the control valve assembly (4) sideways to disengage pin (1) in the manual selector valve (2) from the slot in detent lever (3). Remove the
control valve assembly (4).
Installation Procedure
1. Move the control valve assembly (4) into position under the main housing. Engage the pin (1) in the manual selector valve (2) into the slot in the
detent lever (3).
2. Align the control valve assembly (1) with the dowel pins (2) in the main housing. Seat the control valve assembly against the main housing and
hold it in position.