C 1500 Truck 2WD V8-6.0L VIN U (2002)
42. Align bolts and alignment tab of pressure switch assembly (1) with the pressure switch assembly holes in main valve body (3).
43. Install pressure switch assembly (1) onto main valve body (3).
44. Install reverse signal tube (2) into the main valve body.
Important: Seven bolts (1) and one bolt (2) retain the reverse signal tube and the pressure switch assembly to the main valve body. Bolt (2) is
slightly longer than bolts (1).
45. Install six bolts (1) retaining the pressure switch assembly to the main valve body.
46. Install the remaining bolt (1) retaining the reverse signal tube to the main valve body.
47. Install bolt (2) retaining the reverse signal tube to the pressure switch assembly.
Notice: Refer to Fastener Notice in Service Precautions.
^
Tighten bolts (1,2) to 12 Nm (106 inch lbs.).
