gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Front Door Map Pocket|Page 9645 > < Front Door Map Pocket|Page 9643
Page 1
background image

Trim Panel: Service and Repair
Side Front Door Trim Panel

REMOVAL PROCEDURE

TOOLS REQUIRED

J38778 Trim Panel Remover

CAUTION:  Refer to Battery Disconnect Caution in Cautions and Notices.

1. Disconnect the negative battery cable.
2. Remove the door handle bezel.
3. Remove the window regulator handle, as necessary. 
4. Disconnect the power accessory switch mounting panel wiring connector, as necessary. Refer to Power Accessory Switch Panel Replacement.
5. Remove the trim panel upper extension. 
6. Using a flat blade tool, carefully pry off the trim panel armrest screw cover in order to access the screw.
7. Remove the trim panel armrest screw.
8. Using the J 38778, carefully pry the retainer from the retainer seats.
9. Disconnect the courtesy light connector, if necessary.

10. Remove the trim panel from the door.
11. Remove the courtesy lamp lens or the reflector.

12. Pull the retainers from the slot in the trim panel.
13. Remove the retainers.

INSTALLATION PROCEDURE

Front Door Map Pocket|Page 9645 > < Front Door Map Pocket|Page 9643