C 1500 Truck 2WD V8-6.5L DSL Turbo VIN F (1998)
Engine Oil Dip Stick - Dip Stick Tube: Service and Repair
REMOVAL PROCEDURE
1. Remove the oil level indicator from the tube.
2. Remove the oil level indicator tube mounting bolt.
3. Remove the oil level indicator tube from the engine block.
4. Remove the O-ring from the oil level indicator tube.
INSTALLATION PROCEDURE
IMPORTANT: Always replace existing O-ring when installing the oil level indicator tube.
1. Apply a small amount of clean engine oil on the end of the oil level indicator tube.
2. Install the O-ring on the oil level indicator tube.
