C 1500 Truck 2WD V8-6.5L DSL Turbo VIN F (1998)
Intake Manifold: Service and Repair
Intake Manifold Replacement (Upper)
REMOVAL PROCEDURE
1. Disconnect the battery negative cables from the batteries.
2. Remove the upper intake manifold cover.
3. Remove the air intake duct from the upper intake manifold.
4. Loosen the clamps on the hose between the turbocharger and the upper intake manifold.
IMPORTANT: In order to loosen the sealer, run a small screw driver (flat blade) between the hose and the upper intake manifold. Use caution as
not to damage the hose.
5. Loosen the hose connecting the upper intake manifold and the turbocharger.
6. Slide the hose connecting the upper intake manifold and the turbocharger on to the upper intake manifold.
7. Remove the EGR Valve (L 56 only) from the upper intake manifold.
8. Remove the brace (long for the L 65 and short for the L 56) from the turbocharger to the upper intake manifold.
