C 1500 Truck 2WD V8-6.5L DSL Turbo VIN F (1998)
Positive Crankcase Ventilation Valve: Service and Repair
CDR Hoses
REMOVAL PROCEDURE
The Crankcase Depression Regulator (CDR) valve is replaced as an assembly. Replace the hose, the pipe, and the grommet as required, if the inspection
indicates cracks or decay. Refer to the appropriate service information for the diesel crankcase ventilation system maintenance requirements.
1. Remove the clamp at the CDR valve.
2. Disconnect the hose from the CDR valve.
3. Remove the CDR valve by pulling straight up.
INSTALLATION PROCEDURE
1. Install the CDR valve into the valve cover.
2. Connect the hose.
3. Install the clamp.
Tighten
^
Tighten the clamp to 1.7 Nm (15 lb. in).
