C 1500 Truck 2WD V8-6.5L DSL Turbo VIN F (1998)
Wiper Motor Linkage: Service and Repair
REMOVAL PROCEDURE
1. Remove the wiper arms.
2. Remove the air inlet grille panel.
3. Loosen the nuts attaching the drive link brackets to the crank arm.
4. Remove the brackets from the wiper motor crank arm.
IMPORTANT: Note the position of the right and left transmission links for reassembly.
5. Remove the transmission to cowl bolts.
6. Remove the transmission assembly from the vehicle.
INSTALLATION PROCEDURE
1. Install the wiper transmission assembly to the vehicle.
NOTE: Refer to Fastener Notice in Cautions and Notices.
2. Install the transmission to cowl bolts.
