C 1500 Truck 2WD V8-6.5L DSL Turbo VIN S (1997)
3. Trim panel to the door.
^
Align retainers with holes in door. Carefully apply pressure to seat retainers.
4. Window regulator handle (if equipped).
5. Power accessory switch mounting panel (if equipped with power accessories).
6. Trim panel arm rest screw.
Tighten
^
Trim panel armrest screw to 2 Nm (18 lbs. in.).
^
Insert screw cover.
7. Trim Panel Upper Extension.
8. Door handle bezel.
Trim Panel Upper Extension
Tool Required:
J 38778 Trim Panel Remover
Remove or Disconnect
1. Trim panel from the door.
A. Carefully pry the retainer from door using J 38778.
B. Pull upward to release extension from trim panel.
2. Retainer from extension.
Install or Connect
1. Retainer to extension.
2. Extension to door.
A. Insert extension on to trim panel.
B. Align retainer into hole in door. Push extension until retainer seats.
Power Accessory Switch Mounting Panel
Front Door Power Accessory Switch Mounting Panel
Remove or Disconnect
1. Negative battery cable.