C 1500 Yukon 2WD V8-4.8L VIN V (2000)
REMOVAL PROCEDURE
1. Remove the trim panel.
2. Remove the speaker by pushing in on the top retainer.
3. Disconnect the electrical connector and remove the speaker.
INSTALLATION PROCEDURE
1. Connect the electrical connector.
2. Install the speaker snapping the speaker into place.
3. Install the trim panel.
4. Verify the component's operation.
Speaker Replacement (Side Access)
REMOVAL PROCEDURE
1. Remove the door trim panel.
2. Remove the speaker by pushing down on the retainer.
3. Disconnect the electrical connector.
INSTALLATION PROCEDURE
1. Install the electrical connector.
2. Install the speaker by snapping the speaker into place.
3. Install the door trim panel.
4. Verify the component's operation.
Speaker Replacement (Rear Corner)
