C 1500 Yukon 2WD V8-4.8L VIN V (2000)
REMOVAL PROCEDURE
1. Remove the garnish molding.
2. Remove the garnish molding.
3. Remove the speaker.
4. Disconnect the electrical connectors, as necessary.
INSTALLATION PROCEDURE
1. Connect the electrical connectors, as necessary.
2. Install the speaker.
3. Install the garnish molding.
4. Install the garnish molding.
5. Verify the component's operation.
Speaker Replacement (Rear Subwoofer)
REMOVAL PROCEDURE
1. Remove the rear quarter trim panel.
2. Remove the bolts which retain the subwoofer assembly to the vehicle.