C 1500 Yukon 2WD V8-4.8L VIN V (2000)
Important: If installing the original access door without a door side service hinge or a used access door, you must modify the door side of
the hinge (1) lower extensions (2).
Hinge extensions must maintain a wall thickness of 2 mm between the end of the extensions and the body side hinge nuts (3).
Maintain a wall thickness of 2 mm around the hole at the end of the extension (4).
Prior to refinishing, refer to publication GM 4901M-D-2000 GM Approved Refinish Materials for recommended products. Do not
combine paint systems. Refer to paint manufacturer's recommendations.
16. Clean and prepare all surfaces.
17. Refinish as necessary.
18. Install and align all related panels and components.
Door Service (Cargo Door, Body-Side Lower Hinge)
Door Service (Cargo Door, Body-Side Lower Hinge)
Removal Procedure
1. Visually inspect and restore as much of the damage as possible to factory specifications.
2. Remove all of the related panels and the components.
3. Remove any excess sealer surrounding the hinge.
4. Scribe the location of the hinge on the hinge pillar.
