gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Procedures|Page 15281 > < Procedures
Page 2
background image

4. Remove the screws holding the ashtray housing to the rear of the IP lower trim panel.
5. Remove the ashtray housing from the lower trim housing.

INSTALLATION PROCEDURE

1. Install the ashtray housing to the lower IP trim panel.

NOTE:  Refer to Fastener Notice in Cautions and Notices.

2. Install the screws holding the ashtray housing to the rear of the IP lower trim panel.

Tighten
Tighten the ashtray housing screws to 2 N.m (18 lb in).

3. Connect the ashtray lamp wiring harness to the ashtray housing.

Procedures|Page 15281 > < Procedures