C 1500 Yukon 2WD V8-4.8L VIN V (2000)
1. Install the rear corner garnish molding to the vehicle.
2. Press on the rear corner garnish molding in order to engage the retaining clips.
3. Install the rear upper garnish molding. Refer to Rear Upper Garnish Molding Replacement (Tahoe/Yukon/Escalade/Suburban) .
Center Pillar Garnish Molding Replacement
Center Pillar Garnish Molding Replacement
Removal Procedure
1. Remove the door sill plates.
2. Remove the pillar moldings by holding the moldings firmly while pulling out.
Installation Procedure
1. Install the pillar moldings by pushing until the moldings lock into place.
2. Install the door sill trim plates.
Jack and Tool Stowage Replacement (Extended Cab)
Jack and Tool Stowage Replacement (Extended Cab)
Removal Procedure
