C 1500 Yukon 2WD V8-4.8L VIN V (2000)
Installation Procedure
1. Align the molding clips with the holes in the body panel along the back glass.
2. Snap the molding into place.
Third Pillar Trim Replacement
Third Pillar Trim Replacement
Removal Procedure
1. Remove the rear door sill trim plate.
2. Remove the lower rear seat belt bolt.
3. Remove the trim panel from the vehicle.
Installation Procedure
1. Install the body side lower trim panel to the vehicle.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the lower seat belt bolt.
Tighten the lower seat belt bolt to 70 N.m (52 lb in).
3. Install the rear door sill trim plate.
Trim Panel Replacement - Upper Extension
REMOVAL PROCEDURE
