C 1500 Yukon 2WD V8-4.8L VIN V (2000)
1. Install the master cylinder reservoir. Refer to Master Cylinder Reservoir Replacement.
2. Bench bleed the master cylinder. Refer to Master Cylinder Bench Bleeding.
3. Install the master cylinder
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the master cylinder mounting nuts.
^
Tighten the nuts to 36 N.m (27 lb ft).
5. Remove the pipe caps.
6. Connect the brake pipes.
^
Tighten the fittings to 25 N.m (18 lb ft).
7. Connect the electrical connection at the brake fluid level sensor.
8. Bleed the brakes. Refer to Automated Bleed Procedures.
9. Release the parking brake.