C 1500 Yukon 2WD V8-4.8L VIN V (2000)
1. Remove the right rear quarter trim panel.
2. Disconnect the electrical connector from the temperature actuator.
3. Remove the retaining screws from the temperature actuator.
4. Remove the temperature actuator (1) from the rear HVAC module.
INSTALLATION PROCEDURE
1. Install the temperature actuator (1) to the rear HVAC module.
2. Install the retaining screws to the temperature actuator.
3. Connect the electrical connector to the temperature actuator.
4. Install the right rear quarter trim panel.
