C 1500 Yukon 2WD V8-4.8L VIN V (2000)
3. Install the control assembly to the IP carrier until you hear an audible snap.
4. Install the radio.
5. Install the IP bezel.
Rear Overhead Control A/C Only
REMOVAL PROCEDURE
1. Separate the front of the console (1) from the headliner.
2. Remove the control assembly (2) by releasing the tabs at the rear of the control.
3. Disconnect the electrical connector (3).
INSTALLATION PROCEDURE
1. Connect the electrical connector (3).
2. Install the control assembly (2) to the console.
