C 1500 Yukon 2WD V8-4.8L VIN V (2000)
1. Remove the caps from the fuel pipes.
2. Connect the rear fuel feed pipe (4) and the rear fuel return pipe (5) to the fuel sender (2) and the fuel tank clips (6).
3. Install the fuel tank.
4. Lower the vehicle.
5. Refill the fuel tank.
6. Connect the negative battery cable.
7. Tighten the fuel filler cap.
8. Inspect for leaks.
8.1. Turn the ignition ON for 2 seconds.
8.2. Turn the ignition OFF for 10 seconds.
8.3. Turn the ignition ON.
8.4. Inspect for fuel leaks.
