gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

99-07-30-024 > < PROM - Powertrain Control Module Reprogramming
Page 1
background image

PROM - Programmable Read Only Memory: All Technical Service Bulletins
A/T - Wide Open Throttle 1-2 Double Bump/Harsh Shift

File In Section 06 - Engine/Propulsion System 

Bulletin No.: 99-06-04-049

Date: October, 1999

TECHNICAL

Subject:
Wide Open Throttle (WOT) 1-2 Double Bump and/or Harsh Upshift (Reprogram PCM)

Models:
2000 Chevrolet and GMC C/K Models (Silverado and Sierra) With 4.8 L Engine (VIN V - RPO LR4) and 4L60-E Automatic Transmission (RPO M30)
Built Prior to the following VIN Breakpoints:

Plant

VIN Breakpoint

Pontiac East

YE124221

Fort Wayne

YZ124556

Oshawa

Y1108340

Condition

Some customers may comment on a double bump or harsh shift when making a wide open throttle (WOT) 1-2 upshift.

Cause

Some early built 2000 model year production Siverado and Sierra pickups, with the 4.8 L engine and the 4L60-E automatic transmission, were built with
an engine calibration that may place the engine fuel cut-off RPM too close to the transmission 1-2 WOT upshift point.

Correction

A new calibration has been released, raising the engine fuel cut-off to 6000 RPM. Reprogram the PCM with the new calibration listed below.

Parts Information

Previous

New

Calibration

Calibration

Description

16263681

9357621

C/K 10 003-53
and LR4 and M30

The calibration listed is an electronic calibration and is NOT available from GMSPO. The calibration will be available from Techline starting August
12,1999, on the TIS 2000 Disc 17 CD ROM.

Warranty Information

For vehicles repaired under warranty, use:

Labor
Operation

Description

Labor Time

J6355

Prom-Reprogramming

Use published

On Vehicle

labor operation
time

99-07-30-024 > < PROM - Powertrain Control Module Reprogramming