C 1500 Yukon 2WD V8-4.8L VIN V (2000)
35. Twist together one end from each of the wires in order to short the wires.
36. Twist together one connector wire lead to one deployment wire.
37. Bend flat the twisted connection.
38. Secure and insulate the connection using electrical tape.
39. Twist together, bend, and tape the remaining connector wire lead to the remaining deployment wire.
40. Connect the deployment harness to the inflatable restraint IP module yellow 2-way connector.
41. Route the deployment harness out of the passenger side of the vehicle.
