C 1500 Yukon 2WD V8-4.8L VIN V (2000)
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the stabilizer shaft link nut and bolt to the frame bracket.
3.1.
Tighten the link to frame bracket nut to 65 Nm (48 ft. lbs.).
3.2.
Tighten the ball stud to stabilizer shaft nut to 65 Nm (48 ft. lbs.).
4. Remove the rear axle support
5. Remove the safety stands.
6. Lower the vehicle.
