C 1500 Yukon 2WD V8-4.8L VIN V (2000)
1. Install the spring, piston, ring, and pin.
2. Install the control valve, if removed. Refer to Valve Body.
3. Install the springs, ring, and piston.
4. Install the cover and pin.
Notice: Refer to Fastener Notice in Service Precautions.
5. Install the bolts attaching the cover and pin to the transmission case.
Tighten the bolts to 11 Nm (8 ft. lbs.)
6. Install the oil pan and filter. Refer to Automatic Transmission Fluid/Filter Changing.
