C 1500 Yukon 2WD V8-4.8L VIN V (2000)
Band Apply Servo: Service and Repair
4L60-E Automatic Transmission
^
Tools Required
-
J 29714-A Servo Cover Depressor
Removal Procedure
^
Tools Required
-
J 29714-A Servo Cover Depressor
1. Raise the vehicle. Refer to Vehicle Lifting.
2. Install the J 29714-A.
3. Tighten the bolt in order to compress the servo cover.
4. Remove the servo cover retaining ring.
5. Remove the J 29714-A.
6. Remove the servo cover and the O-ring seal. If the servo cover seems to be hung up on the seal, cut and remove the O-ring seal before removing
the cover.
7. Remove the 2-4 servo assembly.
Installation Procedure
