C 1500 Yukon 2WD V8-4.8L VIN V (2000)
5. Install the pawl return spring.
6. Install the detent lever to the actuator assembly.
7. Install the actuator assembly over the parking pawl.
8. Install the seal and the manual shaft.
9. Install the nut on the shaft.
10. Install the roll pin.
Notice: Refer to Fastener Notice in Service Precautions.
11. Install the parking lock bracket with the two bolts.
Tighten the bolts to 24 Nm (18 ft. lbs.).
12. Install the oil pan and filter. Refer to Automatic Transmission Fluid/Filter Changing.
