C 1500 Yukon 2WD V8-5.3L VIN T (2002)
1. Position the trim panel on the seat.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the screws retaining the trim panel to the seat.
Tighten
Tighten the screws to 2 N.m (18 lb in).
3. Install the remaining screws retaining the seat back release handle and the seat recliner handle to the seat.
Tighten
Tighten the screws to 2 N.m (18 lb in).
Trim Panel Replacement - Hinge Pillar
Trim Panel Replacement - Hinge Pillar
Removal Procedure
1. Remove door sill plate..
2. Remove hinge pillar panel.
Installation Procedure
