C 1500 Yukon 2WD V8-5.3L VIN T (2002)
10.
With the head restraint support (1) folded rearward, finish inserting the support cover (4) inside the slit (3) in the seatback. Reposition the seatback
fabric as necessary to close the slit in the fabric.
11.
Install a support cover on the other head restraint support.
12.
Install the head restraint on the supports and verify that the head restraint supports fold properly.
13.
Repeat the above procedure on the other second row head restraint supports.
14.
Return the seatbacks and cushions to their normal positions.
15.
Install the GM Recall Identification Label.
