C 1500 Yukon 2WD V8-5.3L VIN T (2002)
3. Install the inlet hose clip to the fan shroud.
4. Install the inlet hose to the radiator.
5. Reposition the inlet hose clamp to the radiator.
6. Install the radiator vent inlet hose to the radiator inlet hose clips.
7. If necessary, install the engine sight shield, Refer to Engine Sight Shield Replacement (4.8L, 5.3L, and 6.OL (LQ4) or Engine Sight Shield
Replacement (6.OL (LQ9) in Engine Mechanical - 4.8L, 5.31L, and 6.OL.
Important: Align the arrow at the throttle body end of the duct with the throttle body attaching stud.
8. Install the air cleaner outlet duct.
9. Tighten the air cleaner outlet duct clamps at the following locations:
-
Throttle body
-
MAF/IAT sensor
-
Tighten the air cleaner outlet duct clamp screws to 7 Nm (62 inch lbs.).
10. Fill the cooling system. Refer to Draining and Filling Cooling System.
