C 1500 Yukon 2WD V8-5.3L VIN T (2002)
3. Install the A/C refrigerant filter (3) to the evaporator tube (2) with the flow arrow pointing towards the evaporator.
NOTE: Refer to Fastener Notice in Service Precautions.
4. Install the nuts (4) to the A/C refrigerant filter (1).
Tighten
Tighten the nuts to 15 N.m (11 lb ft).
5. Recharge the A/C system. Refer to Refrigerant Recovery and Recharging.
6. Leak test the fitting(s) of the repaired or reinstalled component using the J 39400-A.
7. Install the air cleaner. Refer to Air Cleaner Assembly Replacement in Computers and Controls Systems.
"For a description of the RPO Code(s) shown in this article or any of the images therein, refer to the RPO Code List found at Vehicle/Application ID".
See: Application and ID/RPO Codes
A/C Refrigerant Filter Replacement (C69)
TOOLS REQUIRED
J 39400-A Halogen Leak Detector
REMOVAL PROCEDURE
1. Recover the refrigerant from the system. Refer to Refrigerant Recovery and Recharging.
2. Remove the air cleaner. Refer to Air Cleaner Assembly Replacement in Computers and Controls Systems.
3. Remove the evaporator tube (2) from the vehicle.
