C 1500 Yukon 2WD V8-5.3L VIN T (2002)
Air Filter Element: Service and Repair
AIR CLEANER ELEMENT REPLACEMENT
REMOVAL PROCEDURE
1. Remove the intake duct (2).
2. Disconnect the electrical connector from the mass air flow/intake air temperature (MAF/IAT) sensor.
3. Loosen the 4 fasteners (8) securing the air cleaner housing top cover (4).
4. Lift and rotate the top cover (4) of the air cleaner housing to gain access to the air filter element.
5. Lift out the air filter element (5).
6. Inspect the air filter element for dust, dirt, or water. Clean or replace the air filter element if required.
INSTALLATION PROCEDURE
