C 1500 Yukon XL 2WD V8-5.3L VIN T (2001)
1. Install the splash guard to the Front Lower Fender.
2. Install the retainers to the splash guard.
3. Align splash guard with wheel well.
4. Remove the protective backing from the adhesive tape while pressing to ensure contact with fender.
5. With an assistant install the front assist step assembly to the vehicle.
6. With an assistant install the retainer (3) attaching the assist step bracket (4) to the lower front fender.
7. With an assistant install the retainers (3) from where the vertical mounting brackets (1).
8. Adjust the clearance between the rocker panel and the assist step to 6 - 10 mm. Check clearance only after the last vertical mounting bracket area.
9. Tighten the assist step fasteners to 20 N.m.
