C 1500 Yukon XL 2WD V8-5.3L VIN T (2001)
Rear Door Striker: Service and Repair
Door Striker Replacement - Body Mounted Rear
Door Striker Replacement - Body Mounted Rear
Removal Procedure
1. Remove the upper garnish trim panel.
2. Remove the striker screws.
3. Remove the striker.
Installation Procedure
1. Install the striker to the vehicle.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the striker screws.
Tighten the screws to 25 N.m (18 lb ft).
3. Install the upper garnish trim panel.
