C 1500 Yukon XL 2WD V8-5.3L VIN T (2001)
Rear Quarter Trim Panel Replacement (Utility Right)
Rear Quarter Trim Panel Replacement (Utility Right)
Removal Procedure
1. Remove the rear seat.
2. Remove the Third Pillar trim panel.
3. Remove the garnish molding.
4. Remove the door sill plate.
5. Remove the quarter panel trim screws.
6. Remove the quarter panel trim from the vehicle.
Lift the quarter panel to release the quarter panel from the vehicle.
Installation Procedure
1. Install the quarter panel trim to the vehicle.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the quarter panel trim screws.
Tighten the quarter panel trim screws to 2 N.m (18 lb in).
3. Install the door sill plate.
4. Install the garnish molding.
5. Install the Third Pillar trim panel.
6. Install the rear seat.
Rear Upper Garnish Molding Replacement (Tahoe/Yukon/Escalade/Suburban)
Rear Upper Garnish Molding Replacement (Tahoe/Yukon/Escalade/Suburban)
Tools Required
J 38778 Door Trim Pad Clip Remover
Removal Procedure
