C 1500 Yukon XL 2WD V8-5.3L VIN T (2001)
6. Remove the engine mount bolts.
7. Remove the left engine mount.
Installation Procedure
1. Position the left engine mount to the engine.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the engine mount bolts.
-
Tighten the engine mount bolts to 50 Nm (37 ft. lbs.).
3. Lower the engine.
4. Remove the adjustable jack stands.
5. Position the engine shield to the vehicle.
6. Install the engine shield bolts.
