C 1500 Yukon XL 2WD V8-5.3L VIN T (2001)
1. Install the insulator (1) on the EVAP canister purge valve (3).
2. Install the EVAP canister purge valve (3) to the engine.
NOTE: Refer to Fastener Notice in Service Precautions.
3. Install the EVAP canister purge valve mount bolt (2).
Tighten
Tighten the EVAP canister purge valve mount bolt to 10.5 N.m (93 lb in).
4. Connect the EVAP pipe (2) to the EVAP canister purge valve (1).
5. Connect the EVAP canister purge valve electrical connector.
6. Install the engine sight shield.
