C 1500 Yukon XL 2WD V8-5.3L VIN T (2001)
20. Connect the accelerator control cable and the cruise control cable to the throttle body.
21. Install the engine sight shield mounting bracket and the bolts.
22. Tighten the fuel tiller cap.
23. Connect the negative battery cable.
24. Use the following procedure in order to inspect for leaks:
24.1. Turn ON the ignition, with the engine OFF, for 2 seconds.
24.2. Turn OFF the ignition for 10 seconds.
24.3. Turn ON the ignition, with the engine OFF.
24.4. Inspect for fuel leaks.
25. Install the engine sight shield.