C 1500 Yukon XL 2WD V8-5.3L VIN T (2001)
10. Note the position of the fuel pipes for aid in installation.
11. Disconnect the fuel feed pipe from the fuel filter (1).
12. Remove the fuel pipes (2) from the retaining clips.
13. Remove the fuel pipes.
INSTALLATION PROCEDURE
IMPORTANT:
^
When replacing the fuel pipes, always replace them with original equipment or parts that meet the GM specifications for those parts. The
replacement pipes must have the same type of fittings as the original pipes in order to ensure the integrity of the connection.
^
DO NOT use copper or aluminum tubing to replace steel tubing. Only tubing meeting the 124 - M specification or its equivalent is capable of
meeting all pressure, corrosion, and vibration characteristics necessary to ensure the durability standard required.
1. Install the fuel pipes (2) into the retaining clips.
2. Connect the fuel feed pipes to the fuel filter.
3. Install the fuel tank.
