C 1500 Yukon XL 2WD V8-5.3L VIN T (2001)
3. Install the handle mounting bolts.
Tighten
Tighten the bolts to 55 N.m (40 lb ft).
4. Connect the bottom cushion trim J-strip.
5. Install the retractor mounting bolt.
Tighten
Tighten the bolt to 55 N.m (40 lb ft).
6. Install the floor anchor bolt.
Tighten
Tighten the bolt to 55 N.m (41 lb ft).
7. Install the seat belt anchor bolt cover.
8. Install the seat back trim.
9. Install the headrests.
10. Install the seat back.
11. Install the latch mounting bolt attaching the retractor bolt anchor to the cushion frame.
Tighten
Tighten the bolt to 55 N.m (40 lb ft).
12. Install the latch cover.
13. Manually rotate the center latch to the unlatched position in order to secure the seat back.
14. Install the seat to the vehicle.
